Prepare pipe passages
Required DURABASE WS products
Self-adhesive wall sealing set for dry wall and floor sealing.
1 waterproof membrane 1 m x 30 m; 2 spray primer; 3 corner sealing tape 120 mm x 50 m; 4 base sealing tape 50 m;
5 Installation aid: squeegee; 6 2x 1/2″ pipe collars; 7 Drip protection sleeve; 8 Installation instructions.
Prepare sealing for pipe passages and stick on waterproof membranes
1. stick a rib of corner adhesive tape with trowel protection strip over the pipe collars. It ensures the secure connection of the remaining waterproof membrane (D7) at the bottom.
2. the passes for the
Cut out the building plugs.
3. screw in the construction plugs.
4 Starting from the center of the corner adhesive tape, mark the waterproof membrane 20 mm upwards 20 mm and cut off the waterproof membrane.
5. place the rest of the waterproof membrane at 20 mm below the center of the corner adhesive tape and stick it down to the floor.
6. cut off the waterproof membrane in the throat of the corner adhesive tape. Dichbahnfest rolls up.
7. saturate the area of the trowel protection and fleece of the waterproof membrane with spray primer.
8. the next waterproof membrane is docked on.
